E5009X NNTS1 Frac Pump Bearing

Designation of bearing:UC203G2T04; d:17 mm; Weight:0.58 kg; Designation of housing:PA204N-; Z:17 mm; B:31 mm; C:12.8 kN; H1:11 mm; J:52 mm; A1:22 mm;

Fatigue limit load, Cu:21.6 kN; Basic Number:483; Characteristic outer ring frequency, BPF0:9.23 Hz; Max operating temperature, Tmax:120 °C; Long Description:Cone; Standard Preci; d1:93 mm; Inventory:0.0; Characteristic rolling element frequency, BSF:7.91 Hz; Number of Tapered Rows:Single Row; Width

Rolling Element Material:Steel; Raceway Ring Shape:Cylindrical Roller; B:32; Large-capacity type:Standard; Inner/Outer Ring Material:Steel; Inner/Outer Ring Material:Steel; Days to Ship:Quote; Specifications:Standard; Load Direction:Radial; Load Direction:Radial;

Width T(mm):12; Bearing Retained:Yes (with retaining; RoHS:6; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] Alu; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; Number of Bearings:Single;

Rolling Element Material:Bearing Steel; Fit:J7; Days to Ship:8 Days; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; d:50; Stroke:No; Surface Treatment:No; Seal:Silicone; Rolling Element Material:Bearing Steel;

Accessory:No Cover; Unit Body Material:Cast Iron; Machining:No; Grease Type:Standard Grease; Surface Treatment:No; Fit:J7; Pillow Type, Category:Standard; Rolling Element Material:Bearing Steel; B:118; Stroke:No;

Fit:J7; B:101.6; Basic Load Rating, Static Rating(N):81900; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Surface Treatment:No; Diameter series symbol:Medium Load; Pillow Type, Category:Standard; Machining:Cast iron cover moun; Bearing Inner Dia. Shape:Cylindrical Bore Set;

C0:40 kN; Weight:7.41 kg; L:224 mm; H2:111 mm; s1:57.6 mm; L1:137 mm; P:300 mm; S:34.1 mm; Recommended tightening torque for set screw:16.8 Nm; A:70 mm;

Min operating temperature, Tmin:-20 °C; Static load, C0:25.2 kN; B:18 mm; Characteristic rolling element frequency, BSF:7.87 Hz; d:65 mm; Mass:0.42 kg; f0:15.8; da min:71.5 mm; D:100 mm; Fatigue limit load, Cu:1.15 kN;

Width T(mm):25 ～ 60; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Days to Ship:8 Days; RoHS:6; Seals:DD (Contact Rubber S; Bearing Part Number:6901; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No;

Number of Bearings:Single; Bearing Material:[Steel] Steel; Width T(mm):11; Bearing Part Number:6901; Shape:Flanged Pilot Type; Volume Discount:Available; Bearing I.D. d(mm):12; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Days to Ship:7 Days;

Z:77.1 mm; N1:27 mm; L:214 mm; J:164 mm; N:14mm; Designation of closed end cover:SCC210; Weight:2.74 kg; S:19 mm; Designation of housing:PLE210N-; H:55.6 mm;

d1:76.4 mm; d:60 mm; D1:115.8 mm; da min:71 mm; Da max:119 mm; Characteristic rolling element frequency, BSF:4.09 Hz; f0:13.2; Dynamic load, C:81.6 kN; B:31 mm; Min operating temperature, Tmin:-20 °C;

Weight:4.45 kg; SW:5.56 mm; B2:30.2 mm; T max.:100 °C; B1:92.1 mm; B:68.3 mm; d:68.26 mm; r:2.5; T min.:-20 °C; C0:68 kN;

Housing Material:1045 Carbon Steel; Days to Ship:8 Days; Height Indication:Height Selection; C Chamfered:Not Provided; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Part Number:6903; Shape:T-Shaped; Bearing Retained:Yes (with retaining;